Stage 2: Process Analysis
Before you begin work on this assignment, be sure you have read the Case Study and reviewed the feedback received on your Stage 1 assignment.
Overview
As the business analyst in the CIO’s department of Maryland Technology Consulting (MTC), your next task in developing your Business Analysis and System Recommendation (BA&SR) Report is toconduct a process analysis. This will identify how the current manual process is working and what improvements could be made to the process that would be supported by a technology solution.
Assignment – BA&SR: Section II.Process Analysis
The first step is to review any feedback from Stage 1 to help improve the effectiveness of your overall report and then add the new section to your report. Only content for Stage 2 will be graded for this submission. Part of the grading criteria for Stage 4 includes evaluating if the document is a very effective and cohesive assemblage of the four sections, is well formatted and flows smoothly from one section to the next. For this assignment, you will add Section II of the Business Analysis and System Recommendation (BA&SR) Report to Section I. You will conduct an analysis of the current hiring process and present information on expected business improvements. This analysis lays the ground work for Section III. Requirements of the BA&SR Report (Stage 3 assignment) which will identify MTC’s requirements for a system.
Using the case study, assignment instructions, Content readings, and external research, develop your Section II. Process Analysis. The case study tells you that the executives and employees at MTC have identified a need for an effective and efficient hiring system. As you review the case study, use the assignment instructions to take notes to assist in your analysis. As the stakeholders provide their needs and expectations to improve the process, identify steps that could be improved with the support of a hiring system. Also look for examples of issues and problems that can be improved with a technology solution.
Use the outline format, headings and tables provided and follow all formatting instructions below.
Begin with your Section I (Stage 1 assignment) and add Section II. Apply specific information from the case study to address each area along with relevant supporting research.
II. Process Analysis
A. Hiring Process
At the beginning of this section, write an introductory opening sentence for this section that addresses what the complete table provides. Refer to Week 3 and 4 content on processes and analyzing process improvements. Additional research can expand your knowledge of these areas.
The first step in analyzing the process is to document what the current process steps are and who is responsible for doing them. Therefore, the table provides the current steps in the manual hiring process provided by the case study. Remember, a process is a series of steps to perform a task; therefore, think about what the users are doing as part of the hiring process. Retain the as-is process steps provided; do not remove or revise these. Complete the second column by identifying the stakeholder responsible for this step based on the interviews in the MTC Case.
The next step is to identify how a hiring or applicant tracking systemcould improve each step in the process and how the business will benefit from that improvement. For each of the as-is process steps provided, complete the To-Be Process column in the table.indicating how this step in the process will be done using the hiring or applicant tracking system.For each process step, the statement should be concise and include an action verb and align with improving or replacing the current manual, as-is process step provided. Then complete the Business Benefits of the Improved Process column by explaining how this part of the process can contribute to the overall business strategy– think at a higher level than the specific process step. Review the examples provided in the Hiring Process table. For each to-be process step, identify the result of using the system, as shown in the two examples. While it is truethat the system will speed up each step of the process, think about how MTCwould benefit more strategically from using an automated system to perform that step.
The first row and last rows have been completed for you as an example and must be retained and not revised.Be sure your table contains a total of 12 steps. Use the examples to help you provide clear to-be process steps and business benefits. Your responses should be written in complete sentences.
MTC Hiring Process
As-Is Process
Responsible MTC
Position
To-Be Process –
How the system Will Support and Improvethe hiring process
Business Benefits
of Improved Process (Align with MTC’s overall business strategy and needs.)
1.
Recruiter receives application from
job hunter via Postal Service Mail.
Recruiter
EXAMPLE PROVIDED –
(Retain text as #1 but remove this label and gray shading in your report)
System will receive application via on-line submission through
MTC Employment Website and store in the applicant database within the hiring
system.
A more efficient submission process decreases time needed to
receive and begin processing applications. This will present a positive image
to potential employees and help MTC compete for top IT talent.
2.
Recruiter screens resumes to identify top
candidates by matching with job requirements from job description.
3.
Recruiter forwards top candidates to
Administrative Assistant via interoffice mail
4.
Administrative Assistant forwards
candidates’ resumes and applications to hiring manager for the position via
interoffice mail.
5.
Hiring Manager reviews applications and
selects who he/she wants to interview.
6.
Hiring Manager sends email to Administrative
Assistant on who he/she has selected to interview and identifies members of
the interview team.
7.
AA schedules interviews by contacting
interview team members and hiring manager to identify possible time slots
8.
AA emails candidates to schedule interviews.
9.
Interview is conducted with candidate,
hiring manager and other members of the interview team.
Hiring Manager and Interview Team
Interview is conducted with candidate,
hiring manager and other members of the interview team. (Hiring System is not
used for this step.)
n/a
10.
AA collects feedback from interviews and
status of candidates
11.
Hiring manager informs the AA on his top
candidate for hiring
12.
Administrative Assistant prepares
offer letter based on information from recruiter and puts in the mail to the
chosen candidate.
Administrative Assistant
EXAMPLE PROVIDED – (Retain text as #12 but remove this
label and gray shading in your report)
System enables AA to prepare job offer
letter by storing the offer letter template and information on each
candidate; allows AA to select information to go into letter and put it into
the template, which can then be reviewed and emailed to the candidate.
More efficient
offer process presents positive image to applicants and decreases time needed
to prepare offer letter, and enablesMTC to hire in advance of the
competition.
B. Expected Improvements – As noted in the case study, there are a lot of manual processes, overwhelming paperwork, difficulty scheduling interviews, etc. related to MTC’s current manual hiring process. A technology solution can address many of these issues. For each of the areas listed in the table below, provide an example of an issue from the case study and how a technology solution could be used to improve that area. Issues and improvements should be addressed in 1-2 clear, complete sentences with information incorporated from the case study. The first one is provided as an example.Note: This is not about the stakeholders’ wishes or expectations for the new system but identifying the current issues they have. Some may be explicitly stated in the interviews and for others you may need to apply some critical thinking. (Provide an introductory sentence and copy the table and insert information within.) For explanations of these areas, refer to Week 4 content on analyzing process improvements.Additional research can expand your knowledge of these areas.
Area
Current Issues
(from the Case Study)
Improvements
(due
to use of technology)
Collaboration:
EXAMPLE PROVIDED
(Retain text but
remove this label and gray shading in your report)
The Hiring Manager states that
recruiting is only one area he is responsible for and he isn’t as responsive
to HR as he could be. Therefore, he
counts on the Recruiters to help manage the process and keep him informed.
Current manual system causes considerable communication
breakdowns and takes additional effort and time to stay on top of the hiring
process.
An
efficient system with all information in one place, easily accessible via a
dashboard, and updated in real time could make his recruiting job easier; and
he could devote time to effectively working collaboratively and proactively
with HR on his staffing needs.
Communications: Explain how a
hiring system could improve internal and external communications
Workflow: Explain how a hiring system could
improve the MTC hiring process by providing a consistent structure for each
participant to perform his/her part in the hiring process.
Relationships: Explain how
implementing an enterprise hiring system could foster stronger relationships
withapplicants/potential employees.
Formatting Your Assignment
Consider your audience – you are writing in the role of anMTC business analyst and your audience is MTC and your boss, the CIO. Don’t discuss MTC as if the reader has no knowledge of the organization. Use third person consistently throughout the report.In third person, the writer avoids the pronouns I, we, my, and ours. The third person is used to make the writing more objective by taking the individual, the “self,” out of the writing. This method is very helpful for effective business writing, a form in which facts, not opinion, drive the tone of the text. Writing in the third person allows the writer to come across as unbiased and thus more informed.
· In Stage 2, you are preparing the second part of a 4-stage report. Use the structure, headings, and outline format provided here for your report. Use the numbering/lettering in the assignment instructions as shown below.
II. Process Analysis
A. Hiring Process
B. Expected Improvements
· Begin with Section I, considering any feedback received, and add to it Section II.
· Write a short concise paper: Use the recommendations provided in each area for length of response. It’s important to value quality over quantity. Section II should not exceed 3 pages.
· Content areas should be double spaced; table entries should be single-spaced.
· To copy a table: Move your cursor to the table, then click on the small box that appears at the upper left corner of the table to highlight the table; right click and COPY the table; put the cursor in your paper where you want the table and right click and PASTE the table.
· Ensure that each of the tables is preceded by an introductory sentence that explains what is contained in the table, so the reader understands why the table has been included.
· Continue to use thetitle pagecreated in Stage 1 that includes: The title of report, company name, your name, Course and Section Number, and date of this submission.
· Use at least two resources with APA formatted citation and reference for this Stage 2 assignment. Use at least one external reference and one from the course content. Course content should be from the class reading content, not the assignment instructions or case study itself. For information on APA format, refer to Content>Course Resources>Writing Resources.
· Add the references required for this assignment to the Reference Page. Additional research in the next stages will be added to this as you build the report.The final document should contain all references from all stages appropriately formatted and alphabetized.
· Running headers are not required for this report.
· Compare your work to the Grading Rubric below to be sure you have met content and quality criteria.
· Submit your paper as a Word document, or a document that can be read in Word. Keep tables in Word format – do not paste in graphics.
· Your submission should include your last name first in the filename:Lastname_firstname_Stage_2
GRADING RUBRIC:
Criteria
Far Above Standards
Above Standards
Meets Standards
Below Standards
Well Below Standards
Possible Points
Stakeholder
Identification
Identification of a logical stakeholder based on the case study
Generally,1 point per stakeholder.
16 Points
14.4- 16 points
10 stakeholders
correctly identified as derived from the Case Study.
13.6 Points
13.6 Points
10 stakeholders correctly identified as derived from the
case study or logical assumption.
12 Points
12 Points
Minimum of 8
stakeholders correctly identified as derived from the case study or logical
assumption.
10.4 Points
10.4 Points
Fewer than 8
stakeholders correctly identified as derived from the case study or logical
assumptions; and/or contains significant incorrect information.
0 points
0-8
Points
Content missing
or extremely incomplete, did not reflect the assignment instructions,
demonstrated little effort, is not supported with information from the Case
Study; and/or is not original work for this class section.
16
To-Be
Process Analysis
Analysis
describes how the system will supportand improve the hiring process
Generally,
0-3 points per to-be process step. Both quantity and quality evaluated.
48 Points
43.2 -48 points
To-Be
Process step improvements clearly relate to corresponding As-Is Process step
and fully explain how the system will support it; demonstrates sophisticated
analysis.
39.84 points
38.4 – 41.6
Points
To-Be
Process step improvements relate to corresponding As-Is Process step and
explains how the system will support it; demonstrates effective analysis.
35.04 points
33.6 – 36.8 Points
To-Be
Process step improvement is provided for each As-Is Process step and an
explanation is provided for each.
30.24 points
28.8 – 32
Points
Fewer
than 10 To-Be Process step improvements and/or explanations are provided;
and/or contains significant incorrect information.
0 points
0-27.2
Points
Content
missing or extremely incomplete, did not reflect the assignment instructions,
showed little or no originality, demonstrated little effort, is not supported
with information from the Case Study; and/or is not original work for this
class section.
48
Business
Benefits of Improved Process
Explains
how each step in the process can contribute to the overall business strategy
Generally,
0-2 points per improved process step. Both quantity and quality evaluated.
32 Points
28.8 – 32 Points
Business
benefits for all 10 process steps are fully explained; demonstrates
sophisticated analysis.
27.2 Points
25.6 – 27.2 points
Business
benefits for all 10 process steps are explained; demonstrates effective
analysis.
24 points
22.4 – 24 points
Business
benefits for all 10 process steps are included.
20.8 points
19.2 – 20.8
Points
Business
benefits for fewer than 10 process steps are provided; and/or contains
significant incorrect information.
0 points
0-18.1
Points
Content
missing or extremely incomplete, did not reflect the assignment instructions,
showed little or no originality, demonstrated little effort, is not supported
with information from the Case Study; and/or is not original work for this
class section.
32
Expected
Improvements
Issues
from case study and improvements due to technology in areas of Communication,
Workflow, and Relationships
Generally,
0-7 points per area. Both quantity and quality evaluated.
32 points
28.8-32
Points
Issues
and improvements for all 3 areas are fully and correctly explained;
demonstrates sophisticated analysis.
27.2 points
24.5 – 27.2
Points
Issues
and improvements for all 3 areas are explained; demonstrates effective
analysis.
24points
22.4 – 24
Points
Issues
and improvements for all 3 areas are provided.
20.8 Points
19.2-20.8
Issues
and improvements for fewer than 3 areas are provided; and/or contains
significant incorrect information.
0 points
0-18.1
Points
Content
missing or extremely incomplete, did not reflect the assignment instructions,
showed little or no originality, demonstrated little effort, is not supported
with information from the Case Study; and/or is not original work for this
class section.
32
Research
Two
or more
sources–one source from within the IFSM 300 course content and one external
(other than the course materials)
16 points
14.4 – 16
Points
Required
resources are incorporated and used effectively. Sources used are relevant
and timely and contribute strongly to the analysis. References are appropriately incorporated
and cited using APA style.
13.6 Points
At least two sources are incorporated and are relevant and
somewhat support the analysis. References are appropriately incorporated and
cited using APA style.
12 Points
Only one resource is used and properly incorporated and/or
reference(s) lack correct APA style.
10.4 Points
10.4 Points
A source may be used, but is not properly incorporated or used,
and/or is not effective or appropriate; and/or does not follow APA style for
references and citations.
0 points
0-8 Points
No course content or external research incorporated; or
reference listed is not cited within the text.
16
Format
Uses
outline format provided; includes Title Page and Reference Page
16 points
14.4-16
Points
Well
organized and easy to read. Very few
or no errors in sentence structure, grammar, and spelling; double-spaced,
written in third person and presented in a professional format.
13.6 Points
13.6 Points
Effective organization; has few errors in sentence structure,
grammar, and spelling; double-spaced, written in third person and presented
in a professional format.
12 Points
12 Points
Some organization; may have some errors in sentence structure,
grammar and spelling. Report is double spaced and written in third person.
10.4 Points
10.4 Points
Not well organized, and/or contains several grammar and/or
spelling errors; and/or is not double-spaced and written in third person.
0 points
0-8 Points
Extremely poorly written, has many grammar and/or spelling
errors, or does not convey the information.
16
TOTAL
Points Possible
160
