Use Thevenin’s theory to simplify the 15v single source network shown below. The load resistor is given as 14Ω.: Engineering Science Assignment, UK

Part 2a

Use Thevenin’s theory to simplify the 15v single source network shown below. The load resistor is given as 14Ω. Determine the terminal voltage and current drawn.

Use Norton’s theory to simplify the 6v/3v two source network shown below. A load resistor of 4.7k is placed across A-B. Determine the terminal voltage and current drawn.

the amplitude of the fundamental;
the frequency of the fundamental;
the order of any harmonic components present;
the amplitude of any harmonic components present;
the phase angle of any harmonic components present (relative to the fundamental).

A complex waveform is given by the expression:

i  = 5 sin(50pt) + 3 sin(200pt – p /2) + 1.5 sin(500pt – p/2) mA

Describe using the above example:

An ac circuit with a 80 μF capacitor in series with a coil of resistance 16Ω and inductance 160mH is connected to a 100V, 100 Hz supply is shown below. Calculate

the inductive reactance
the capacitive reactance
the circuit impedance and V-I phase angle θ
the circuit current I
the phasor voltages VR, VL, VC and VS
the resonance circuit frequency

Also construct a fully labeled and appropriately ‘scaled’ voltage phasor diagram.

Part 2b

Explain the principles of electromagnetic induction and how they apply to ac electrical machines such as motors, generators and transformers.
Two coils have a mutual inductance of 0.2H. If the current in one coil is changed from 10A to 4A in 10 ms, calculate (a) the average induced e.m.f. in the second coil, (b) the change of flux linked with the second coil if it is wound with 500 turns.

A coil, having a resistance of 20 Ω and an inductance of 0.0382 H, is connected in parallel with a circuit consisting of a 150 μ F capacitor in series with a 10 Ω resistor. The arrangement is connected to a 230 V, 50 Hz supply. Using the method used in 2a, determine the current in each branch and the total supply current.

Construct a fully labelled, scaled phasor diagram to determine the total current
Evaluate both techniques to solve problems, on series-parallel R, L, C circuits by commenting on the pros and cons of each.

The post Use Thevenin’s theory to simplify the 15v single source network shown below. The load resistor is given as 14Ω.: Engineering Science Assignment, UK appeared first on Students Assignment Help UK.